Blue Monster PTFE Thread Seal Tape is a thicker, denser, general-purpose thread seal tape that comes in a monstrous 1,429" roll. That’s 5 times more tape than conventional rolls of low-density thin tapes. Fewer wraps are necessary to affect a leak-proof seal and it applies easily. No waste and no re-taping make sealing joints a breeze. Now available in a smaller roll, Mini-Monster PTFE thread sealant tape.
Blue Monster thread sealing tape is manufactured from PTFE resin, a polymer consisting of recurring tetrafluoroethylene monomers whose formula is (CF2-CF2)n. It is inert and compatible with a very wide range of materials. Use Blue Monster on threads made from galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, polypropylene, PVC, CPVC, ABS, fiberglass and more.
Pigment Color: Blue
Length: 1429"
Width: 1/2"
Thickness: 0.0035" +/- 10%
Density: 0.8g/cm3
Elongation: >100%
Tensile Strength: 15N / mm2
Pressure rating: Mill-Rose Blue Monster Thread Sealing Tape has been used to seal fittings carrying water and oil at pressures up to 10,000 PSI or 69,000kPa
Note: Pressure ratings are relative to the quality and torque of the fittings and the amount of tape used.
Temperature Range: -450°F to +500°F (-268°C to +260°C) PTFE is completely stable up to +500 F or +260°C. Decomposition is slow up to 750°F or 400°C. Although decomposition will occur on contact with naked flames.
© 2024 brsupplyinc.com All rights reserved.Powered by SimpleApps
.png){kind=logo}